How to Clean Entryway Light Fixtures: 3 Washable Solutions

Tired of dirty, hard-to-clean entryway light fixtures? Upgrade to washable, splash-proof lighting solutions that stay fresh despite muddy shoes, clutter, and dust buildup.

The Zepboo RinseReady collection features water-resistant woven shades that can be easily wiped clean, while strategic placement (at least 1.8 meters above ground) prevents dirt and splashes. Want extra protection?

Apply automotive wax to light fixtures to create a dirt-repellent surface that stays cleaner for longer. Discover practical lighting hacks to keep your entryway bright, stylish, and hassle-free.

Introduction

The entryway is a high-traffic area where dirt, mud, and dust easily accumulate—especially near light fixtures. If you’re constantly battling grimy, hard-to-clean lighting, it’s time to switch to washable solutions that can withstand daily messes.

Here are three easy-to-maintain entryway light fixtures, featuring the Zepboo RinseReady collection, smart placement tips, and a protective wax coating trick to keep your lighting clean and fresh.

1. Zepboo RinseReady: Washable Woven Light Fixtures

Traditional fabric or metal entryway light fixtures can trap dust, absorb odors, and stain easily. Zepboo RinseReady solves this problem with:

✔ Water-resistant bamboo and rattan shades—simply rinse off dirt with a damp cloth.
✔ Removable inner lining—washable and stain-resistant for long-term use.
✔ Mold-resistant coating—perfect for humid or rainy climates.

🔹 Pro Tip: Pair with LED bulbs to reduce heat buildup and minimize dust attraction.

2. Splash-Proof Placement: The 1.8-Meter Rule

To keep your entryway lighting cleaner for longer, follow this placement strategy:

📏 Install light fixtures at least 1.8 meters (6 feet) from the floor to prevent direct splashes from wet shoes or pets.
💡 Use semi-flush or pendant lighting instead of low-hanging fixtures in tight spaces.
🛑 Avoid placing sconces near shoe racks where dirt buildup is more frequent.

🔹 Bonus Tip: Use a motion-sensor entryway light for hands-free convenience and reduced contact with dirty hands.

3. Wax Coating Trick: Repel Dirt & Stains

Want to add an extra layer of protection to your entryway light fixtures? Try this automotive wax hack:

🛠️ Step 1: Apply a thin layer of clear car wax on the outer surface of your light fixture.
🛠️ Step 2: Let it dry, then buff gently with a soft cloth.
🛠️ Step 3: Reapply every 3-4 months to maintain its dust-repellent and water-resistant effect.

🔹 Why It Works: The wax barrier helps prevent dirt from sticking, making your lighting easier to clean.

Conclusion

Entryway light fixtures shouldn’t be a magnet for dirt. By choosing washable materials like Zepboo RinseReady, following smart placement guidelines, and using a protective wax coating, you can keep your lighting clean, fresh, and stylish—no matter how muddy your entryway gets.

Upgrade to practical, low-maintenance lighting and enjoy a welcoming, clutter-free entryway with minimal cleaning effort.